AP Physics C: Mechanics – Work, Energy, and Power MCQs – 30 Practice Questions with Answers

Test yourself on AP Physics C: Mechanics Unit 3 Work, Energy, and Power with 30 original calculus-based practice questions covering work as an integral of a variable force, the work-energy theorem, gravitational and spring potential energy, energy diagrams, power as a derivative and conservation of mechanical energy. Every answer includes the full working.

Formula recap: W = ∫ F · dx; work-energy theorem Wnet = ΔK; kinetic energy K = 0.5mv2; gravitational potential energy U = mgh; spring potential energy U = 0.5kx2; power P = dW ÷ dt = F · v; for a conservative force, F = −dU ÷ dx. Revise all the mechanics formulas on our AP Physics Formula Sheet.

Work as an Integral and the Work-Energy Theorem

Q1. A constant force of 10 N pushes a block 5 m along a surface, with the force acting at 60° to the displacement. How much work does the force do?

  • (A) 50 J
  • (B) 25 J
  • (C) 43 J
  • (D) 0 J
Show Answer

Answer: B – W = Fd cos θ = 10 × 5 × cos 60° = 50 × 0.5 = 25 J.

Q2. A force F(x) = 3x2, where F is in newtons and x is in metres, acts on a particle as it moves from x = 0 to x = 2.0 m. How much work does the force do?

  • (A) 4 J
  • (B) 8 J
  • (C) 12 J
  • (D) 24 J
Show Answer

Answer: B – W = ∫02 3x2 dx = [x3]02 = 8 J.

Q3. What is the kinetic energy of a 2 kg object moving at 6 m/s?

  • (A) 12 J
  • (B) 36 J
  • (C) 72 J
  • (D) 6 J
Show Answer

Answer: B – K = 0.5mv2 = 0.5 × 2 × 36 = 36 J.

Q4. A 3 kg object speeds up from 4 m/s to 10 m/s. What is the net work done on it?

  • (A) 42 J
  • (B) 84 J
  • (C) 126 J
  • (D) 150 J
Show Answer

Answer: C – Wnet = ΔK = 0.5 × 3 × (100 − 16) = 1.5 × 84 = 126 J.

Q5. A spring of constant 200 N/m is compressed by 0.30 m. How much elastic potential energy is stored?

  • (A) 3 J
  • (B) 9 J
  • (C) 18 J
  • (D) 27 J
Show Answer

Answer: B – U = 0.5kx2 = 0.5 × 200 × 0.09 = 9 J.

Q6. A force of 20 N pushes an object at a constant speed of 5 m/s in the direction of the force. What power is delivered?

  • (A) 4 W
  • (B) 25 W
  • (C) 100 W
  • (D) 500 W
Show Answer

Answer: C – P = Fv = 20 × 5 = 100 W.

Q7. A motor does 600 J of work in 20 s. What is its average power output?

  • (A) 12 W
  • (B) 30 W
  • (C) 120 W
  • (D) 12000 W
Show Answer

Answer: B – Pavg = W ÷ t = 600 ÷ 20 = 30 W.

Q8. What is the work done by a conservative force on a particle that moves around any closed loop and returns to its starting point?

  • (A) Always positive
  • (B) Always negative
  • (C) Zero
  • (D) Equal to the change in kinetic energy
Show Answer

Answer: C – for a conservative force the work depends only on the endpoints, so over a closed loop it is zero. (The net work by all forces equals the change in kinetic energy, which is also zero here only if the speed returns to its initial value.)

Q9. A 2 kg mass is lifted 5 m vertically at constant speed. Taking g = 10 m/s2, what is the change in its gravitational potential energy?

  • (A) 10 J
  • (B) 50 J
  • (C) 100 J
  • (D) 200 J
Show Answer

Answer: C – ΔU = mgh = 2 × 10 × 5 = 100 J.

Q10. A block starts from rest and slides down a frictionless incline of vertical height 4 m. Taking g = 10 m/s2, what is its speed at the bottom?

  • (A) 4 m/s
  • (B) 6.3 m/s
  • (C) 8.9 m/s
  • (D) 20 m/s
Show Answer

Answer: C – conservation of energy gives 0.5mv2 = mgh, so v = √(2gh) = √80 ≈ 8.9 m/s.

Potential Energy, Power and Energy Diagrams

Q11. A force F(x) = 10 − 2x, where F is in newtons and x is in metres, acts on a particle as it moves from x = 0 to x = 5.0 m. How much work does the force do?

  • (A) 0 J
  • (B) 25 J
  • (C) 50 J
  • (D) 75 J
Show Answer

Answer: B – W = ∫05 (10 − 2x) dx = [10x − x2]05 = 50 − 25 = 25 J.

Q12. A 0.50 kg block moving at 4 m/s compresses a spring of constant 100 N/m and momentarily stops. What is the maximum compression?

  • (A) 0.14 m
  • (B) 0.28 m
  • (C) 0.40 m
  • (D) 0.57 m
Show Answer

Answer: B – 0.5mv2 = 0.5kx2 gives x = v√(m ÷ k) = 4 × √(0.50 ÷ 100) = 4 × 0.0707 ≈ 0.28 m.

Q13. A motor lifts a 10 kg mass vertically at a constant speed of 2 m/s. Taking g = 10 m/s2, what power must the motor deliver?

  • (A) 20 W
  • (B) 100 W
  • (C) 200 W
  • (D) 400 W
Show Answer

Answer: C – the motor must exert a force mg = 100 N, so P = Fv = 100 × 2 = 200 W.

Q14. A 5 kg block slides 10 m across a horizontal surface with μk = 0.20. Taking g = 10 m/s2, what work is done by friction?

  • (A) −10 J
  • (B) −50 J
  • (C) −100 J
  • (D) −200 J
Show Answer

Answer: C – friction force = μkmg = 10 N opposing the motion, so W = −10 × 10 = −100 J.

Q15. A particle moves in a potential U(x) = x2, where U is in joules and x is in metres. Where is the equilibrium position?

  • (A) x = 0 m
  • (B) x = 1 m
  • (C) x = −1 m
  • (D) There is no equilibrium position
Show Answer

Answer: A – equilibrium requires F = −dU ÷ dx = −2x = 0, so x = 0 m (a stable minimum of U).

Q16. A pendulum bob of length 1.0 m is released from rest in the horizontal position. Taking g = 10 m/s2, what is its speed at the bottom of the swing?

  • (A) 2.2 m/s
  • (B) 4.5 m/s
  • (C) 9.8 m/s
  • (D) 10 m/s
Show Answer

Answer: B – the bob falls a vertical distance L = 1.0 m, so v = √(2gL) = √20 ≈ 4.5 m/s.

Q17. A small block slides without friction around a vertical loop of radius 2 m. What is the minimum height above the bottom of the loop from which it must be released to stay on the track at the top?

  • (A) 2 m
  • (B) 4 m
  • (C) 5 m
  • (D) 10 m
Show Answer

Answer: C – at the top, staying on the track needs v2 ≥ gR. Energy gives v2 = 2g(h − 2R), so h ≥ 2.5R = 5 m.

Q18. A car engine delivers a constant power P while the car accelerates. How does the instantaneous power relate to the driving force F and speed v?

  • (A) P = F ÷ v
  • (B) P = Fv
  • (C) P = F × v2
  • (D) P = 0.5Fv
Show Answer

Answer: B – instantaneous power is P = dW ÷ dt = F · v. At constant power, the force must fall as the speed rises.

Q19. A 2 kg block moving at 5 m/s hits a spring of constant 50 N/m on a frictionless surface. What is the maximum compression of the spring?

  • (A) 0.5 m
  • (B) 1.0 m
  • (C) 1.4 m
  • (D) 2.0 m
Show Answer

Answer: B – 0.5 × 2 × 25 = 0.5 × 50 × x2, so 25 = 25x2 and x = 1.0 m.

Q20. A block slides down a rough incline, losing mechanical energy. The loss of mechanical energy equals

  • (A) the work done by gravity
  • (B) the work done by the normal force
  • (C) the work done by friction
  • (D) the change in kinetic energy only
Show Answer

Answer: C – gravity and the normal force do no net non-conservative work here; the change in mechanical energy equals the work done by non-conservative forces, here friction.


Conservation of Energy and Applications

Q21. A force F(x) = 4x + 3, where F is in newtons and x is in metres, acts on a particle as it moves from x = 1.0 m to x = 3.0 m. How much work does the force do?

  • (A) 14 J
  • (B) 22 J
  • (C) 30 J
  • (D) 36 J
Show Answer

Answer: B – W = ∫13 (4x + 3) dx = [2x2 + 3x]13 = (18 + 9) − (2 + 3) = 22 J.

Q22. A satellite in a circular orbit has total mechanical energy E = −GMm ÷ (2r). If the orbit radius is doubled, what happens to the kinetic energy?

  • (A) It doubles
  • (B) It stays the same
  • (C) It halves
  • (D) It quarters
Show Answer

Answer: C – orbital kinetic energy K = GMm ÷ (2r), which is inversely proportional to r, so doubling r halves K.

Q23. A crane lifts a 100 kg load 10 m vertically in 5 s at constant speed. Taking g = 10 m/s2, what is the average power delivered?

  • (A) 200 W
  • (B) 1000 W
  • (C) 2000 W
  • (D) 10000 W
Show Answer

Answer: C – work = mgh = 100 × 10 × 10 = 10000 J, so P = 10000 ÷ 5 = 2000 W.

Q24. A particle moves in a potential U(x) = 2x2 − 4x, where U is in joules and x is in metres. At what position is it in stable equilibrium?

  • (A) x = −1 m
  • (B) x = 0 m
  • (C) x = 1 m
  • (D) x = 2 m
Show Answer

Answer: C – F = −dU ÷ dx = −4x + 4 = 0 gives x = 1 m, and d2U ÷ dx2 = 4 > 0, so it is a stable minimum.

Q25. What work does the centripetal force do on an object in uniform circular motion over one complete revolution?

  • (A) 2πrF
  • (B) Fr
  • (C) 0 J
  • (D) −2πrF
Show Answer

Answer: C – the centripetal force is always perpendicular to the displacement, so F · dx = 0 at every instant and the total work is zero.

Q26. A spring is compressed to twice its original compression. By what factor does the stored elastic potential energy change?

  • (A) 2
  • (B) 4
  • (C) 8
  • (D) 16
Show Answer

Answer: B – U = 0.5kx2 is proportional to x2, so doubling x multiplies U by 22 = 4.

Q27. A 4 kg block slides 5 m down a 30° incline with μk = 0.10. Taking g = 10 m/s2, how much work is done by friction?

  • (A) −5 J
  • (B) −10 J
  • (C) −17 J
  • (D) −20 J
Show Answer

Answer: C – friction = μkmg cos θ = 0.10 × 40 × 0.866 = 3.46 N, so W = −3.46 × 5 ≈ −17 J.

Q28. The power delivered by a force varies as P(t) = 6t, where P is in watts and t is in seconds. How much work is done between t = 0 and t = 4.0 s?

  • (A) 12 J
  • (B) 24 J
  • (C) 48 J
  • (D) 96 J
Show Answer

Answer: C – W = ∫04 6t dt = [3t2]04 = 48 J.

Q29. A ball is thrown straight up with initial kinetic energy K0. Ignoring air resistance, what is its kinetic energy when it reaches half its maximum height?

  • (A) 0
  • (B) K0 ÷ 4
  • (C) K0 ÷ 2
  • (D) 3K0 ÷ 4
Show Answer

Answer: C – at half the maximum height, half the initial energy has become potential energy, so K = K0 − K0 ÷ 2 = K0 ÷ 2.

Q30. A net work of 120 J is done on a 3 kg object starting from rest. What is its final speed?

  • (A) 4.5 m/s
  • (B) 8.9 m/s
  • (C) 20 m/s
  • (D) 40 m/s
Show Answer

Answer: B – 0.5 × 3 × v2 = 120, so v2 = 80 and v ≈ 8.9 m/s.

Keep revising: work through the other AP Physics C: Mechanics units from the Physics MCQs hub, and keep the AP Physics Formula Sheet open while you practise.

All questions on this page are original practice questions written for QuaidianPoint. They are not College Board past-paper questions and this page is not affiliated with College Board.