AP Physics C: Electricity and Magnetism – Electromagnetic Induction MCQs – 30 Practice Questions with Answers

Test yourself on AP Physics C Unit 13: Electromagnetic Induction with 30 original calculus-based practice questions covering magnetic flux, Faraday’s law, Lenz’s law, motional emf, induced electric fields, self-inductance, LR circuits, and LC oscillations. Every answer includes the full working.

Formula recap: magnetic flux φ = B A cos θ; Faraday’s law: emf = − N (dφ ÷ dt); motional emf = B L v; induced emf in a rotating coil: emfmax = N A B ω; inductor emf = − L (dI ÷ dt); stored energy U = (1 ÷ 2) L I2; LR time constant τ = L ÷ R; LC frequency ω = 1 ÷ √(L C). Revise all the E and M formulas on our AP Physics Formula Sheet.

Magnetic Flux and Faraday’s Law

Q1. A loop of area 0.050 m2 sits perpendicular to a uniform field of 0.40 T. What is the magnetic flux through it?

  • (A) 0.020 Wb
  • (B) 0.010 Wb
  • (C) 0.20 Wb
  • (D) 8.0 Wb
Show Answer

Answer: A – φ = B A cos θ = 0.40 × 0.050 × cos 0° = 0.020 Wb.

Q2. The loop in Q1 is rotated so its plane is parallel to the field. The flux becomes

  • (A) 0.020 Wb
  • (B) 0.010 Wb
  • (C) zero
  • (D) 0.040 Wb
Show Answer

Answer: C – When the plane is parallel to the field, the loop normal is perpendicular to the field, so θ = 90° and cos θ = 0, giving zero flux.

Q3. The flux through a 200-turn coil changes from 0.030 Wb to zero in 0.050 s. What average emf is induced?

  • (A) 0.60 V
  • (B) 6.0 V
  • (C) 120 V
  • (D) 12 V
Show Answer

Answer: C – emf = − N (Δφ ÷ Δt) = − 200 × (0 − 0.030) ÷ 0.050 = 200 × 0.60 = 120 V in magnitude. The minus sign gives the direction by Lenz’s law.

Q4. A coil of area 0.020 m2 with 50 turns sits in a field that increases at 0.80 T/s, with the field perpendicular to the coil plane. What emf is induced?

  • (A) 0.016 V
  • (B) 0.80 V
  • (C) 0.40 V
  • (D) 1.6 V
Show Answer

Answer: B – emf = N A (dB ÷ dt) = 50 × 0.020 × 0.80 = 0.80 V in magnitude.

Q5. A magnet is dropped through a conducting ring. The induced current in the ring

  • (A) always flows in the same direction
  • (B) reverses direction as the magnet passes the middle of the ring
  • (C) is zero throughout
  • (D) flows only after the magnet has passed
Show Answer

Answer: B – While the magnet approaches, flux through the ring grows one way; while it leaves, flux shrinks. By Lenz’s law the induced current opposes each change, so it reverses when the flux stops growing and starts shrinking.

Q6. Lenz’s law is a consequence of

  • (A) charge conservation
  • (B) energy conservation
  • (C) momentum conservation
  • (D) Gauss’s law
Show Answer

Answer: B – If the induced current aided the change instead of opposing it, the change would grow without limit and create energy from nothing. The minus sign in Faraday’s law enforces energy conservation.

Q7. The flux through a loop varies as φ(t) = 0.040 cos(50 t) Wb (t in seconds). What is the maximum induced emf in the single-turn loop?

  • (A) 0.040 V
  • (B) 2.0 V
  • (C) 0.80 V
  • (D) 50 V
Show Answer

Answer: B – emf = − dφ ÷ dt = 0.040 × 50 sin(50 t) = 2.0 sin(50 t) V, so the maximum magnitude is 2.0 V.

Q8. A conducting loop is pulled out of a uniform magnetic field at constant speed. The induced emf during the exit is

  • (A) zero, because the field is uniform
  • (B) constant, because the area in the field shrinks at a constant rate
  • (C) increasing with time
  • (D) decreasing with time
Show Answer

Answer: B – Flux = B × (area still in the field), and that area shrinks linearly with time at constant speed, so dφ ÷ dt is constant and the emf is constant until the loop is fully out.

Q9. A coil is rotated in a uniform magnetic field. The induced emf is zero at the instant when

  • (A) the flux is maximum
  • (B) the flux is zero
  • (C) the coil plane is parallel to the field
  • (D) the coil speed is maximum
Show Answer

Answer: A – emf depends on the rate of change of flux, not on flux itself. When flux is at a maximum it is momentarily not changing (its time derivative is zero), so emf is zero. When flux is zero it is changing fastest and emf is maximum.

Q10. A generator coil has N = 100 turns, area 0.030 m2, field 0.50 T, and rotates at 60 rad/s. What is its peak emf?

  • (A) 90 V
  • (B) 45 V
  • (C) 180 V
  • (D) 9.0 V
Show Answer

Answer: A – emfmax = N A B ω = 100 × 0.030 × 0.50 × 60 = 90 V. The emf varies sinusoidally as the coil rotates.

Motional EMF and Induced Electric Fields

Q11. A rod of length 0.20 m moves at 3.0 m/s perpendicular to a uniform field of 0.50 T, with the rod perpendicular to both the field and its motion. What emf is induced between its ends?

  • (A) 0.030 V
  • (B) 0.30 V
  • (C) 3.0 V
  • (D) 0.10 V
Show Answer

Answer: B – emf = B L v = 0.50 × 0.20 × 3.0 = 0.30 V. Free charges in the rod are pushed by the magnetic force q v B until the resulting electric field balances it.

Q12. A rod slides on conducting rails in a magnetic field, completing a circuit of resistance 5.0 Ω. With B = 0.40 T, rod length 0.50 m, and speed 2.0 m/s, what current flows?

  • (A) 0.080 A
  • (B) 0.40 A
  • (C) 0.16 A
  • (D) 0.020 A
Show Answer

Answer: A – emf = B L v = 0.40 × 0.50 × 2.0 = 0.40 V. Current I = emf ÷ R = 0.40 ÷ 5.0 = 0.080 A. The magnetic force on this current opposes the motion, so an external agent must do work to keep the rod moving.

Q13. In Q12, the mechanical power needed to keep the rod moving at constant speed equals

  • (A) 0.032 W
  • (B) 0.16 W
  • (C) 0.0080 W
  • (D) zero
Show Answer

Answer: A – Electrical power dissipated = I2 R = (0.080)2 × 5.0 = 0.032 W, and by energy conservation the mechanical power input must equal this. (Check: force = I L B = 0.080 × 0.50 × 0.40 = 0.016 N, times speed 2.0 m/s = 0.032 W.)

Q14. A magnetic field confined to a circular region of radius R increases at a steady rate dB ÷ dt. The induced electric field at a distance r less than R from the centre has magnitude

  • (A) (r ÷ 2) (dB ÷ dt)
  • (B) (R ÷ 2) (dB ÷ dt)
  • (C) r (dB ÷ dt)
  • (D) zero
Show Answer

Answer: A – Faraday’s law in integral form: E × 2 π r = π r2 (dB ÷ dt), so E = (r ÷ 2) (dB ÷ dt), circling the region. The induced electric field is non-conservative: its line integral around a closed loop is non-zero.

Q15. For the same changing field as in Q14, at a distance r greater than R outside the field region, the induced electric field magnitude is

  • (A) (r ÷ 2) (dB ÷ dt)
  • (B) (R2 ÷ 2 r) (dB ÷ dt)
  • (C) (R ÷ 2) (dB ÷ dt)
  • (D) zero
Show Answer

Answer: B – Now the flux is π R2 B (only the field region contributes), so E × 2 π r = π R2 (dB ÷ dt), giving E = (R2 ÷ 2 r) (dB ÷ dt), falling as 1 ÷ r outside.

Q16. A metal ring is dropped toward a magnet with its plane horizontal. The induced current creates a magnetic field that

  • (A) attracts the ring to the magnet
  • (B) repels the ring, slowing its fall
  • (C) has no effect on the fall
  • (D) reverses the magnet’s polarity
Show Answer

Answer: B – By Lenz’s law the induced field opposes the increasing flux, so it repels the approaching magnet and brakes the ring’s fall (eddy-current braking uses the same effect).

Q17. A conducting disc rotates in a magnetic field perpendicular to its plane. Currents induced in the disc are called

  • (A) displacement currents
  • (B) eddy currents
  • (C) drift currents
  • (D) conduction currents in wires only
Show Answer

Answer: B – Eddy currents are loops of induced current inside a bulk conductor, circulating in response to changing flux or motion through a field. They dissipate energy as heat and provide magnetic braking.

Q18. A loop of resistance 2.0 Ω experiences a flux change of 0.060 Wb. How much total charge flows around the loop during the change?

  • (A) 0.030 C
  • (B) 0.12 C
  • (C) 0.060 C
  • (D) 0.015 C
Show Answer

Answer: A – Charge = ∫ I dt = ∫ (emf ÷ R) dt = Δφ ÷ R = 0.060 ÷ 2.0 = 0.030 C. Remarkably, this depends only on the total flux change, not on how fast it happens.


Inductance, LR Circuits, and LC Oscillations

Q19. An inductor of 0.20 H carries a current changing at 5.0 A/s. What emf is induced across it?

  • (A) 0.040 V
  • (B) 1.0 V
  • (C) 25 V
  • (D) 0.25 V
Show Answer

Answer: B – emf = L |dI ÷ dt| = 0.20 × 5.0 = 1.0 V, opposing the change in current.

Q20. A solenoid of length 0.50 m, cross-sectional area 4.0 × 10−4 m2, and 500 turns has self-inductance approximately

  • (A) 2.5 × 10−4 H
  • (B) 6.3 × 10−5 H
  • (C) 2.5 × 10−3 H
  • (D) 1.3 × 10−4 H
Show Answer

Answer: A – L = μ0 N2 A ÷ l = (4 π × 10−7) × 250000 × 4.0 × 10−4 ÷ 0.50 = (4 π × 10−7 × 100) ÷ 0.50 = 1.26 × 10−4 ÷ 0.50 = 2.5 × 10−4 H.

Q21. An LR circuit has L = 0.60 H and R = 30 Ω, connected to a 12 V battery. The current after one time constant is approximately what fraction of its final value?

  • (A) 37 percent
  • (B) 63 percent
  • (C) 86 percent
  • (D) 100 percent
Show Answer

Answer: B – I(t) = Imax (1 − e−R t ÷ L), with time constant L ÷ R = 0.020 s. At t = L ÷ R, I = Imax (1 − e−1) = 0.63 Imax. Final current = 12 ÷ 30 = 0.40 A, so after one time constant I = 0.25 A.

Q22. In the LR circuit of Q21, after the switch has been closed a very long time, the switch is moved to disconnect the battery and short the inductor through the resistor. The current then decays as

  • (A) I0 (1 − e−R t ÷ L)
  • (B) I0 e−R t ÷ L
  • (C) I0 e−L t ÷ R
  • (D) constant I0
Show Answer

Answer: B – With no battery, the loop equation is L (dI ÷ dt) + I R = 0, whose solution is I(t) = I0 e−R t ÷ L, decaying with time constant L ÷ R.

Q23. An inductor stores 0.80 J when carrying 4.0 A. What is its inductance?

  • (A) 0.050 H
  • (B) 0.10 H
  • (C) 0.20 H
  • (D) 0.40 H
Show Answer

Answer: B – U = (1 ÷ 2) L I2, so L = 2 U ÷ I2 = 1.6 ÷ 16 = 0.10 H.

Q24. An LC circuit has L = 0.20 H and C = 50 μF. What is its angular frequency?

  • (A) 100 rad/s
  • (B) 316 rad/s
  • (C) 1000 rad/s
  • (D) 32 rad/s
Show Answer

Answer: B – ω = 1 ÷ √(L C) = 1 ÷ √(0.20 × 50 × 10−6) = 1 ÷ √(1.0 × 10−5) = 1 ÷ 3.16 × 10−3 = 316 rad/s. Frequency f = ω ÷ 2 π = 50 Hz.

Q25. In an ideal LC circuit, at the instant the capacitor charge is maximum, the current is

  • (A) maximum
  • (B) zero
  • (C) half its maximum
  • (D) negative maximum
Show Answer

Answer: B – Charge and current are a quarter-cycle out of phase: q = Qmax cos(ω t) gives I = − ω Qmax sin(ω t), which is zero when cos is plus or minus 1. All energy is then in the capacitor electric field.

Q26. A transformer has 200 primary turns and 1000 secondary turns, with 120 V (rms) on the primary. Assuming an ideal transformer, the secondary voltage is

  • (A) 24 V
  • (B) 120 V
  • (C) 600 V
  • (D) 240 V
Show Answer

Answer: C – Vs ÷ Vp = Ns ÷ Np = 1000 ÷ 200 = 5, so Vs = 5 × 120 = 600 V. In an ideal transformer power is conserved, so the secondary current is one fifth of the primary current.

Q27. Mutual inductance M between two coils means that a current change in coil 1 induces an emf in coil 2 equal to

  • (A) M (dI1 ÷ dt)
  • (B) − M (dI1 ÷ dt)
  • (C) M I1
  • (D) M ÷ (dI1 ÷ dt)
Show Answer

Answer: B – emf2 = − M (dI1 ÷ dt). The minus sign is Lenz’s law: the induced emf opposes the change in flux that produced it.

Q28. The energy density in a magnetic field B in vacuum is

  • (A) (1 ÷ 2) ε0 B2
  • (B) B2 ÷ (2 μ0)
  • (C) μ0 B2 ÷ 2
  • (D) B ÷ (2 μ0)
Show Answer

Answer: B – uB = B2 ÷ (2 μ0), the magnetic analogue of uE = (1 ÷ 2) ε0 E2. For a solenoid this integrates to (1 ÷ 2) L I2.

Q29. An LC circuit is charged and then left to oscillate, but the wires have small resistance. Over time the oscillations

  • (A) grow in amplitude
  • (B) stay constant in amplitude
  • (C) decay in amplitude as energy is lost as heat
  • (D) stop after exactly one cycle
Show Answer

Answer: C – Resistance dissipates energy as I2 R heat each cycle, so the charge amplitude decays exponentially (damped oscillation), just as a real pendulum loses amplitude to friction.

Q30. A square loop of side 0.10 m is pulled at 2.0 m/s out of a field of 0.50 T, with the field perpendicular to the loop plane. While it is partially out, the induced emf is

  • (A) 0.010 V
  • (B) 0.10 V
  • (C) 1.0 V
  • (D) zero
Show Answer

Answer: B – emf = B L v where L is the length of the side cutting the field boundary: 0.50 × 0.10 × 2.0 = 0.10 V. Equivalently, area in the field shrinks at L v = 0.20 m2/s, so dφ ÷ dt = 0.50 × 0.20 = 0.10 V.

Keep revising: work through the other AP Physics C Electricity and Magnetism sections from the Physics MCQs hub, and keep the AP Physics Formula Sheet open while you practise.

All questions on this page are original practice questions written for QuaidianPoint. They are not College Board past-paper questions and this page is not affiliated with College Board.