AP Physics C: Electricity and Magnetism – Electric Circuits MCQs – 30 Practice Questions with Answers

Test yourself on AP Physics C Unit 11: Electric Circuits with 30 original calculus-based practice questions covering current, resistance, Kirchhoff’s laws, power, RC circuits solved from their differential equations, and the behaviour of LR and LC circuits. Every answer includes the full working.

Formula recap: I = dQ ÷ dt; V = I R; P = I V = I2 R = V2 ÷ R; RC charging: q(t) = Qmax (1 − e−t ÷ RC), I(t) = I0 e−t ÷ RC; RC time constant τ = R C; LR time constant τ = L ÷ R; LC angular frequency ω = 1 ÷ √(L C). Revise all the E and M formulas on our AP Physics Formula Sheet.

Current, Resistance, and Kirchhoff’s Laws

Q1. A current of 2.0 A flows for 30 s through a wire. How much charge passes a point in the wire?

  • (A) 15 C
  • (B) 60 C
  • (C) 0.067 C
  • (D) 120 C
Show Answer

Answer: B – Q = I t = 2.0 × 30 = 60 C. In calculus form, Q = ∫ I dt, which reduces to I t for steady current.

Q2. A resistor of 12 Ω carries a current of 0.50 A. What is the voltage across it, and the power dissipated?

  • (A) 6.0 V, 3.0 W
  • (B) 24 V, 12 W
  • (C) 6.0 V, 12 W
  • (D) 24 V, 3.0 W
Show Answer

Answer: A – V = I R = 0.50 × 12 = 6.0 V. P = I V = 0.50 × 6.0 = 3.0 W (equivalently I2 R = 0.25 × 12 = 3.0 W).

Q3. Resistors of 4.0 Ω and 6.0 Ω are connected in series across a 10 V battery. What current flows?

  • (A) 2.5 A
  • (B) 1.0 A
  • (C) 1.7 A
  • (D) 0.40 A
Show Answer

Answer: B – Series resistance = 4.0 + 6.0 = 10 Ω, so I = V ÷ R = 10 ÷ 10 = 1.0 A. The voltages divide as 4.0 V and 6.0 V.

Q4. Resistors of 4.0 Ω and 6.0 Ω are connected in parallel across a 12 V battery. What total current does the battery supply?

  • (A) 2.0 A
  • (B) 5.0 A
  • (C) 1.2 A
  • (D) 3.0 A
Show Answer

Answer: B – Branch currents are 12 ÷ 4.0 = 3.0 A and 12 ÷ 6.0 = 2.0 A. By Kirchhoff’s junction rule the total is 3.0 + 2.0 = 5.0 A. (Equivalent resistance is 2.4 Ω, and 12 ÷ 2.4 = 5.0 A.)

Q5. A battery of emf 12 V and internal resistance 2.0 Ω supplies a current of 1.0 A. What is its terminal voltage?

  • (A) 14 V
  • (B) 12 V
  • (C) 10 V
  • (D) 6.0 V
Show Answer

Answer: C – Vterminal = emf − I r = 12 − (1.0 × 2.0) = 10 V. The missing 2.0 V is dropped across the internal resistance.

Q6. A wire of length L and cross-sectional area A has resistance R. If its length is doubled and its area is halved, its resistance becomes

  • (A) R
  • (B) 2 R
  • (C) 4 R
  • (D) R ÷ 4
Show Answer

Answer: C – R = ρ L ÷ A. Doubling L multiplies R by 2 and halving A multiplies R by another 2, giving 4 R in total.

Q7. An ideal ammeter is connected in a circuit. It must have

  • (A) very high resistance, connected in parallel
  • (B) very low resistance, connected in series
  • (C) very high resistance, connected in series
  • (D) very low resistance, connected in parallel
Show Answer

Answer: B – An ammeter measures the current through a branch, so it goes in series with that branch, and its resistance must be negligible so it does not change the current it measures. An ideal voltmeter, by contrast, has infinite resistance and goes in parallel.

Q8. Three identical resistors R are connected so that two are in parallel and that combination is in series with the third. The equivalent resistance is

  • (A) R ÷ 3
  • (B) (3 ÷ 2) R
  • (C) 3 R
  • (D) (2 ÷ 3) R
Show Answer

Answer: B – The parallel pair gives R ÷ 2. Adding the series resistor gives R ÷ 2 + R = (3 ÷ 2) R.

Q9. A 60 W bulb and a 100 W bulb, both rated for 120 V, are connected in series across 120 V. Which bulb glows more brightly?

  • (A) The 100 W bulb
  • (B) The 60 W bulb
  • (C) Both equally
  • (D) Neither glows
Show Answer

Answer: B – At fixed rating voltage, R = V2 ÷ P, so the 60 W bulb has the larger resistance. In series the current is common, so P = I2 R is larger for the larger resistance: the 60 W bulb glows brighter.

Q10. A circuit has a current that varies as I(t) = 4.0 t amperes (t in seconds). How much charge flows between t = 0 and t = 2.0 s?

  • (A) 4.0 C
  • (B) 8.0 C
  • (C) 16 C
  • (D) 2.0 C
Show Answer

Answer: B – Q = ∫02 I dt = ∫02 4.0 t dt = [2.0 t2]02 = 8.0 C.

RC Circuits: Differential Equations and Time Constants

Q11. A series RC circuit has R = 10 kΩ and C = 100 μF. What is its time constant?

  • (A) 0.10 s
  • (B) 1.0 s
  • (C) 10 s
  • (D) 0.010 s
Show Answer

Answer: B – τ = R C = (10 × 103) × (100 × 10−6) = 1.0 s.

Q12. In the circuit of Q11, connected to a 20 V battery, the capacitor charge after one time constant is approximately what fraction of its maximum charge?

  • (A) 37 percent
  • (B) 50 percent
  • (C) 63 percent
  • (D) 86 percent
Show Answer

Answer: C – q(t) = Qmax (1 − e−t ÷ τ). At t = τ, q = Qmax (1 − e−1) = Qmax (1 − 0.37) = 0.63 Qmax.

Q13. At the instant a charging RC circuit is connected to the battery, the current is

  • (A) zero
  • (B) maximum, equal to emf ÷ R
  • (C) emf ÷ (2 R)
  • (D) Q ÷ (R C)
Show Answer

Answer: B – The uncharged capacitor initially has zero voltage, so the full battery emf appears across R and I0 = emf ÷ R. The current then decays as I0 e−t ÷ RC.

Q14. A capacitor charged to 12 V discharges through a resistor. After two time constants, its voltage is approximately

  • (A) 12 V
  • (B) 4.4 V
  • (C) 1.6 V
  • (D) 0 V
Show Answer

Answer: C – V(t) = V0 e−t ÷ τ. At t = 2τ, V = 12 × e−2 = 12 × 0.135 = 1.6 V.

Q15. The loop equation for a charging RC circuit can be written as a differential equation for the charge q. Which form is correct?

  • (A) R (dq ÷ dt) + q ÷ C = emf
  • (B) R (dq ÷ dt) − q ÷ C = emf
  • (C) (dq ÷ dt) + R C q = emf
  • (D) R q + (1 ÷ C) (dq ÷ dt) = emf
Show Answer

Answer: A – Kirchhoff’s loop rule: emf = voltage across R plus voltage across C = I R + q ÷ C, and I = dq ÷ dt, giving R (dq ÷ dt) + q ÷ C = emf. Separating variables and integrating gives the exponential charging law.

Q16. A discharging RC circuit has R = 5.0 kΩ and C = 20 μF. How long does it take for the current to fall to 37 percent of its initial value?

  • (A) 0.010 s
  • (B) 0.10 s
  • (C) 1.0 s
  • (D) 0.20 s
Show Answer

Answer: B – I(t) = I0 e−t ÷ RC reaches 0.37 I0 when t = R C = (5.0 × 103) × (20 × 10−6) = 0.10 s, since e−1 = 0.37.

Q17. Two RC circuits have the same capacitor but resistances R and 2R. Their time constants compare as

  • (A) equal
  • (B) the 2R circuit has twice the time constant
  • (C) the 2R circuit has half the time constant
  • (D) the 2R circuit has four times the time constant
Show Answer

Answer: B – τ = R C is directly proportional to R, so doubling R doubles τ and the circuit charges and discharges more slowly.

Q18. After a very long time, a capacitor in a series RC circuit connected to a battery acts like

  • (A) a short circuit (zero resistance)
  • (B) an open circuit (no current flows)
  • (C) a resistor of value R
  • (D) a battery of emf equal to the battery
Show Answer

Answer: B – As t approaches infinity, q approaches C times emf and I = I0 e−t ÷ RC approaches zero. The fully charged capacitor blocks steady current, like a break in the circuit.


LR Circuits, LC Oscillations, and Power

Q19. A series LR circuit has L = 0.40 H and R = 20 Ω. What is its time constant?

  • (A) 0.020 s
  • (B) 0.050 s
  • (C) 8.0 s
  • (D) 50 s
Show Answer

Answer: A – For an inductor circuit, τ = L ÷ R = 0.40 ÷ 20 = 0.020 s. Note this is L divided by R, unlike RC where the time constant is the product.

Q20. In the LR circuit of Q19, connected to a 10 V battery, the current after a very long time is

  • (A) 0 A
  • (B) 0.50 A
  • (C) 2.0 A
  • (D) 10 A
Show Answer

Answer: B – After a long time the current is steady, so dI ÷ dt = 0 and the inductor voltage L (dI ÷ dt) is zero: the inductor acts like a wire. Then I = emf ÷ R = 10 ÷ 20 = 0.50 A.

Q21. At the instant an LR circuit is connected to a battery, the current is

  • (A) maximum, emf ÷ R
  • (B) zero, because the inductor opposes the change in current
  • (C) emf ÷ (2 R)
  • (D) infinite
Show Answer

Answer: B – The inductor voltage L (dI ÷ dt) initially takes the full emf, and the current grows as I(t) = (emf ÷ R) (1 − e−R t ÷ L), starting from zero. This is the opposite of a charging capacitor, whose current starts at maximum.

Q22. An inductor of 0.50 H carries a current of 2.0 A. How much energy is stored in its magnetic field?

  • (A) 0.50 J
  • (B) 1.0 J
  • (C) 2.0 J
  • (D) 4.0 J
Show Answer

Answer: B – U = (1 ÷ 2) L I2 = 0.5 × 0.50 × (2.0)2 = 0.5 × 0.50 × 4.0 = 1.0 J.

Q23. An LC circuit has L = 0.10 H and C = 10 μF. What is its oscillation period?

  • (A) 6.3 × 10−4 s
  • (B) 6.3 × 10−3 s
  • (C) 1.0 × 10−3 s
  • (D) 6.3 × 10−2 s
Show Answer

Answer: B – ω = 1 ÷ √(L C) = 1 ÷ √(0.10 × 10 × 10−6) = 1 ÷ √(1.0 × 10−6) = 1000 rad/s. Period T = 2 π ÷ ω = 6.28 ÷ 1000 = 6.3 × 10−3 s.

Q24. In an ideal LC circuit, the total energy

  • (A) decays exponentially
  • (B) oscillates between the capacitor electric field and the inductor magnetic field, with the sum constant
  • (C) stays entirely in the capacitor
  • (D) grows with time
Show Answer

Answer: B – Charge and current vary sinusoidally, a quarter-cycle out of phase: when the capacitor is fully charged the current is zero, and when the current is maximum the capacitor is uncharged. Total U = q2 ÷ (2 C) + (1 ÷ 2) L I2 stays constant (with no resistance).

Q25. An LC circuit has maximum charge Qmax = 4.0 × 10−4 C and angular frequency ω = 1000 rad/s. What is the maximum current?

  • (A) 0.040 A
  • (B) 0.40 A
  • (C) 4.0 A
  • (D) 0.0040 A
Show Answer

Answer: B – I = − dq ÷ dt, and for q = Qmax cos(ω t), the current amplitude is Imax = ω Qmax = 1000 × 4.0 × 10−4 = 0.40 A.

Q26. The differential equation for an ideal LC circuit, in terms of charge q on the capacitor, is

  • (A) L (d2q ÷ dt2) + q ÷ C = 0
  • (B) L (dq ÷ dt) + q ÷ C = 0
  • (C) (d2q ÷ dt2) + L C q = 0
  • (D) R (dq ÷ dt) + q ÷ C = 0
Show Answer

Answer: A – Loop rule: voltage across L plus voltage across C = 0, so L (dI ÷ dt) + q ÷ C = 0, and with I = dq ÷ dt this becomes L (d2q ÷ dt2) + q ÷ C = 0, the simple harmonic oscillator equation with ω2 = 1 ÷ (L C).

Q27. A battery of 12 V drives a current of 2.0 A through a resistor for 5.0 s. How much energy is delivered?

  • (A) 24 J
  • (B) 120 J
  • (C) 60 J
  • (D) 240 J
Show Answer

Answer: B – Power P = I V = 2.0 × 12 = 24 W. Energy = P t = 24 × 5.0 = 120 J, all dissipated as heat in the resistor.

Q28. A resistor dissipates 8.0 W when the voltage across it is 4.0 V. What is its resistance?

  • (A) 0.50 Ω
  • (B) 2.0 Ω
  • (C) 32 Ω
  • (D) 16 Ω
Show Answer

Answer: B – P = V2 ÷ R, so R = V2 ÷ P = 16 ÷ 8.0 = 2.0 Ω. The current is V ÷ R = 2.0 A, and I V = 8.0 W checks out.

Q29. In an LR circuit the current is switched off by opening a switch. The inductor then

  • (A) keeps the current flowing unchanged forever
  • (B) produces a large emf trying to maintain the current, decaying as e−R t ÷ L
  • (C) instantly drops its current to zero with no emf
  • (D) reverses its resistance
Show Answer

Answer: B – Current through an inductor cannot change instantaneously. The collapsing magnetic field induces an emf L (dI ÷ dt) that tries to keep the current going, and the current decays exponentially with time constant L ÷ R, often producing a spark across the switch.

Q30. An RC circuit and an LR circuit have the same time constant τ. If R is doubled in both, the new time constants are

  • (A) both doubled
  • (B) both halved
  • (C) RC doubled, LR halved
  • (D) RC halved, LR doubled
Show Answer

Answer: C – τRC = R C grows with R, while τLR = L ÷ R shrinks with R. Doubling R doubles the RC time constant and halves the LR time constant. This opposite dependence is a common exam trap.

Keep revising: work through the other AP Physics C Electricity and Magnetism sections from the Physics MCQs hub, and keep the AP Physics Formula Sheet open while you practise.

All questions on this page are original practice questions written for QuaidianPoint. They are not College Board past-paper questions and this page is not affiliated with College Board.