AP Physics 2: Thermodynamics MCQs – 30 Practice Questions with Answers

Test yourself on AP Physics 2 Unit 9 Thermodynamics with 30 original practice questions covering thermal equilibrium, kinetic theory, the ideal gas law, the first law of thermodynamics, PV diagrams, heat engines and entropy. Every answer includes the full working, using SI units throughout.

Formula recap: ideal gas law PV = nRT; average kinetic energy per molecule = (3/2)kBT; internal energy of a monatomic ideal gas U = (3/2)nRT; first law ΔU = Q + W (with W the work done ON the gas); heat Q = mcΔT; Carnot efficiency e = 1 − TC ÷ TH. Revise all the AP Physics 2 formulas on our AP Physics Formula Sheet.

Thermal Equilibrium, Kinetic Theory and the Ideal Gas Law

Q1. Two metal blocks are placed in thermal contact inside an insulated box. After a long time, no further net heat flows between them. Which statement must be true?

  • (A) The blocks have the same mass
  • (B) The blocks have the same internal energy
  • (C) The blocks are at the same temperature
  • (D) The blocks have the same specific heat capacity
Show Answer

Answer: C – thermal equilibrium means no net heat transfer, which occurs when the temperatures are equal. Masses, internal energies and specific heats need not be equal.

Q2. An ideal gas is at a pressure of 2.0 × 105 Pa, occupies 0.010 m3 and is at 300 K. How many moles of gas are present? (R = 8.31 J/mol·K)

  • (A) 0.080 mol
  • (B) 0.80 mol
  • (C) 8.0 mol
  • (D) 80 mol
Show Answer

Answer: B – n = PV ÷ RT = (2.0 × 105 × 0.010) ÷ (8.31 × 300) = 2000 ÷ 2493 ≈ 0.80 mol.

Q3. A fixed volume of ideal gas is heated so that its Kelvin temperature doubles. What happens to its pressure?

  • (A) It halves
  • (B) It stays the same
  • (C) It doubles
  • (D) It quadruples
Show Answer

Answer: C – at constant volume and amount, PV = nRT gives P proportional to T, so doubling T doubles P.

Q4. The Kelvin temperature of an ideal gas doubles. By what factor does the root-mean-square speed of its molecules change?

  • (A) It halves
  • (B) It increases by a factor of √2, about 1.41
  • (C) It doubles
  • (D) It quadruples
Show Answer

Answer: B – vrms is proportional to √T, so doubling T multiplies vrms by √2 ≈ 1.41.

Q5. What is the internal energy of 2.0 mol of a monatomic ideal gas at 300 K? (R = 8.31 J/mol·K)

  • (A) 1.2 × 103 J
  • (B) 2.5 × 103 J
  • (C) 5.0 × 103 J
  • (D) 7.5 × 103 J
Show Answer

Answer: D – U = (3/2)nRT = 1.5 × 2.0 × 8.31 × 300 = 7479 J ≈ 7.5 × 103 J.

Q6. A gas is compressed at constant temperature. Which statement about its internal energy is correct?

  • (A) It increases, because work is done on the gas
  • (B) It decreases, because the volume decreases
  • (C) It stays the same, because the temperature is unchanged
  • (D) It stays the same, because the pressure increases
Show Answer

Answer: C – for an ideal gas, internal energy depends only on temperature, so an isothermal change leaves U unchanged.

Q7. Two identical containers hold the same number of moles of ideal gas at the same temperature. Container A holds helium (atomic mass 4 u) and container B holds argon (atomic mass 40 u). How do the average molecular speeds compare?

  • (A) Helium molecules move faster, by a factor of √10, about 3.2
  • (B) Argon molecules move faster, by a factor of 10
  • (C) The speeds are equal
  • (D) Helium molecules move faster, by a factor of 10
Show Answer

Answer: A – at the same temperature the average kinetic energy (1/2)mv2 is the same, so v is proportional to 1 ÷ √m. The mass ratio is 40 ÷ 4 = 10, so the speed ratio is √10 ≈ 3.2, with the lighter helium faster.

Q8. An ideal gas at 300 K and 1.0 × 105 Pa is compressed to half its volume at constant temperature. What is its new pressure?

  • (A) 5.0 × 104 Pa
  • (B) 1.0 × 105 Pa
  • (C) 2.0 × 105 Pa
  • (D) 4.0 × 105 Pa
Show Answer

Answer: C – at constant temperature, Boyle’s law gives P1V1 = P2V2, so halving V doubles P to 2.0 × 105 Pa.

Q9. Which process describes heat transfer by the bulk motion of a fluid, such as warm air rising above a heater?

  • (A) Conduction
  • (B) Convection
  • (C) Radiation
  • (D) Evaporation
Show Answer

Answer: B – convection is heat transfer by the bulk movement of a fluid. Conduction passes through a material without bulk motion, and radiation needs no medium.

Q10. A sample of ideal gas is heated at constant pressure from 300 K to 600 K. Its volume changes from 0.020 m3 to

  • (A) 0.010 m3
  • (B) 0.020 m3
  • (C) 0.040 m3
  • (D) 0.080 m3
Show Answer

Answer: C – at constant pressure, V is proportional to T (Charles’s law), so doubling T doubles V to 0.040 m3.

The First Law and Thermodynamic Processes

Q11. A gas absorbs 500 J of heat and does 200 J of work on its surroundings as it expands. What is the change in its internal energy?

  • (A) −700 J
  • (B) −300 J
  • (C) +300 J
  • (D) +700 J
Show Answer

Answer: C – with W as work done ON the gas, W = −200 J, so ΔU = Q + W = 500 + (−200) = +300 J.

Q12. A gas expands adiabatically and does 150 J of work on its surroundings. What is the change in its internal energy?

  • (A) −150 J
  • (B) 0 J
  • (C) +150 J
  • (D) +300 J
Show Answer

Answer: A – adiabatic means Q = 0, and work done ON the gas is W = −150 J, so ΔU = Q + W = −150 J. The gas cools as it expands.

Q13. An ideal gas undergoes an isothermal expansion, absorbing 400 J of heat. How much work does the gas do on its surroundings?

  • (A) 0 J
  • (B) 200 J
  • (C) 400 J
  • (D) 800 J
Show Answer

Answer: C – isothermal means ΔU = 0, so Q + W = 0 with W the work ON the gas. Hence W = −400 J, meaning the gas does 400 J of work on its surroundings.

Q14. A gas in a rigid, sealed container loses 300 J of heat to its surroundings. What is the change in its internal energy?

  • (A) −300 J
  • (B) 0 J
  • (C) +300 J
  • (D) It cannot be found without the pressure
Show Answer

Answer: A – the container is rigid, so no work is done (W = 0). With Q = −300 J, ΔU = Q + W = −300 J.

Q15. On a PV diagram, the work done BY a gas during an expansion at constant pressure P from volume V1 to V2 is

  • (A) zero
  • (B) P(V2 − V1)
  • (C) P(V1 − V2)
  • (D) (V2 − V1) ÷ P
Show Answer

Answer: B – at constant pressure, work done by the gas equals the area under the PV curve, which is the rectangle P(V2 − V1).

Q16. A gas expands at a constant pressure of 3.0 × 105 Pa from 0.010 m3 to 0.030 m3. How much work does the gas do?

  • (A) 3.0 × 103 J
  • (B) 6.0 × 103 J
  • (C) 9.0 × 103 J
  • (D) 1.2 × 104 J
Show Answer

Answer: B – work done by the gas = PΔV = 3.0 × 105 × (0.030 − 0.010) = 3.0 × 105 × 0.020 = 6.0 × 103 J.

Q17. A gas completes one full cycle on a PV diagram, returning to its starting pressure, volume and temperature. The net work done by the gas in the cycle is 800 J. How much net heat was absorbed by the gas?

  • (A) 0 J
  • (B) 400 J
  • (C) 800 J
  • (D) 1600 J
Show Answer

Answer: C – over a full cycle ΔU = 0, so Q + W = 0 with W the work ON the gas (−800 J). Hence net heat absorbed Q = +800 J.

Q18. Two identical samples of ideal gas start at the same state. One expands isothermally and the other expands adiabatically to the same final volume. Which statement is correct?

  • (A) The adiabatic expansion ends at a higher temperature
  • (B) The isothermal expansion ends at a lower temperature
  • (C) The adiabatic expansion ends at a lower temperature
  • (D) Both end at the same temperature
Show Answer

Answer: C – in the adiabatic expansion no heat enters, so the work done by the gas comes from internal energy and the gas cools. In the isothermal expansion heat enters to keep the temperature constant.

Q19. A gas is compressed quickly in an insulated cylinder, so that almost no heat is exchanged. Its temperature

  • (A) decreases, because the volume decreases
  • (B) stays the same
  • (C) increases, because work done on the gas raises its internal energy
  • (D) decreases, because work is done on the gas
Show Answer

Answer: C – the process is approximately adiabatic (Q = 0) and W is positive (work ON the gas), so ΔU = W is positive and the temperature rises. This is why a bicycle pump warms up.

Q20. On a PV diagram, a clockwise cycle encloses an area of 500 J. What is the net work done BY the gas over the cycle?

  • (A) −500 J
  • (B) 0 J
  • (C) +500 J
  • (D) +1000 J
Show Answer

Answer: C – the net work done by the gas in a cycle equals the enclosed area on the PV diagram, and a clockwise cycle gives positive work done by the gas: +500 J.


Heat, Heat Engines and Entropy

Q21. How much heat is needed to raise the temperature of 0.50 kg of water by 10 K? (specific heat capacity of water = 4200 J/kg·K)

  • (A) 2100 J
  • (B) 8400 J
  • (C) 21000 J
  • (D) 42000 J
Show Answer

Answer: C – Q = mcΔT = 0.50 × 4200 × 10 = 21000 J.

Q22. A heat engine absorbs 1000 J of heat from a hot reservoir and rejects 600 J to a cold reservoir in each cycle. What is its efficiency and its work output per cycle?

  • (A) 40% and 400 J
  • (B) 60% and 600 J
  • (C) 40% and 600 J
  • (D) 60% and 400 J
Show Answer

Answer: A – work = 1000 − 600 = 400 J, and efficiency = work ÷ heat absorbed = 400 ÷ 1000 = 0.40 = 40%.

Q23. A Carnot engine operates between reservoirs at 600 K and 300 K. What is its maximum possible efficiency?

  • (A) 25%
  • (B) 50%
  • (C) 100%
  • (D) 200%
Show Answer

Answer: B – Carnot efficiency = 1 − TC ÷ TH = 1 − 300 ÷ 600 = 1 − 0.50 = 0.50 = 50%.

Q24. A refrigerator transfers 300 J of heat from inside a cold box to the room, using 100 J of electrical work. What is its coefficient of performance?

  • (A) 0.33
  • (B) 3.0
  • (C) 4.0
  • (D) 0.25
Show Answer

Answer: B – coefficient of performance = heat removed ÷ work input = 300 ÷ 100 = 3.0.

Q25. Which statement best expresses the second law of thermodynamics?

  • (A) Energy can be created but not destroyed
  • (B) Heat flows spontaneously from a hotter object to a colder object, and no engine can be 100% efficient
  • (C) The internal energy of an isolated system always decreases
  • (D) All thermodynamic processes are reversible
Show Answer

Answer: B – the second law forbids spontaneous heat flow from cold to hot without work input, and sets a maximum efficiency below 100% for any heat engine operating between finite temperatures.

Q26. A block of ice melts in a warm room. What happens to the total entropy of the ice plus the room?

  • (A) It decreases
  • (B) It stays the same
  • (C) It increases
  • (D) It becomes zero
Show Answer

Answer: C – melting is an irreversible process, so the total entropy of the system plus surroundings increases, as required by the second law.

Q27. How much heat is needed to melt 0.20 kg of ice at 0 °C? (specific latent heat of fusion of ice = 3.34 × 105 J/kg)

  • (A) 1.67 × 104 J
  • (B) 3.34 × 104 J
  • (C) 6.68 × 104 J
  • (D) 3.34 × 105 J
Show Answer

Answer: C – Q = mL = 0.20 × 3.34 × 105 = 6.68 × 104 J.

Q28. Equal masses of water and aluminium, both at 20 °C, each absorb 1000 J of heat. Aluminium has a much smaller specific heat capacity than water. Which warms up more?

  • (A) The water, because it has the larger specific heat capacity
  • (B) The aluminium, because ΔT = Q ÷ mc is larger when c is smaller
  • (C) Both warm up by the same amount
  • (D) Neither warms up, because the heat is used to expand them
Show Answer

Answer: B – with the same Q and m, the temperature rise is inversely proportional to c, so the aluminium (smaller c) shows the larger temperature rise.

Q29. A heat engine claims to absorb 500 J per cycle, do 500 J of work per cycle, and reject no heat. Why is this impossible?

  • (A) It violates conservation of energy
  • (B) It violates the second law: some heat must be rejected to a cold reservoir
  • (C) It violates the ideal gas law
  • (D) It is possible if the engine is perfectly insulated
Show Answer

Answer: B – energy is conserved (500 J in, 500 J out as work), but the second law forbids a 100% efficient engine operating in a cycle; some heat must be rejected to a colder reservoir.

Q30. An ideal gas expands freely into a vacuum (no work done, no heat exchanged). What happens to its temperature and its entropy?

  • (A) Temperature falls and entropy falls
  • (B) Temperature stays the same and entropy increases
  • (C) Temperature rises and entropy stays the same
  • (D) Temperature stays the same and entropy stays the same
Show Answer

Answer: B – with Q = 0 and W = 0, ΔU = 0, so for an ideal gas the temperature is unchanged. The free expansion is irreversible and the gas occupies more microstates, so its entropy increases.

Keep revising: work through the other AP Physics 2 sections from the Physics MCQs hub, and keep the AP Physics Formula Sheet open while you practise.

All questions on this page are original practice questions written for QuaidianPoint. They are not College Board past-paper questions and this page is not affiliated with College Board.