AP Physics 1: Fluids MCQs – 30 Practice Questions with Answers
Test yourself on AP Physics 1 Unit 8 Fluids with 30 original practice questions covering density, pressure, hydrostatic pressure, buoyancy and Archimedes’ principle, Pascal’s principle, volume flow rate, the continuity equation and Bernoulli’s principle. Every answer includes the full working. Take g = 10 m/s2 and atmospheric pressure as 101000 Pa where needed.
Formula recap: density ρ = m ÷ V; pressure P = F ÷ A; hydrostatic (gauge) pressure P = ρgh; buoyant force Fb = ρfluidVdisplacedg; volume flow rate Q = Av; continuity: A1v1 = A2v2; Bernoulli: P + 0.5ρv2 + ρgh = constant along a streamline. Revise all the formulas on our AP Physics Formula Sheet.
Density and Pressure
Q1. A block has mass 4.0 kg and volume 0.0020 m3. What is its density?
- (A) 0.00050 kg/m3
- (B) 8.0 kg/m3
- (C) 2000 kg/m3
- (D) 8000 kg/m3
Show Answer
Answer: C – ρ = m ÷ V = 4.0 ÷ 0.0020 = 2000 kg/m3.
Q2. A force of 100 N acts on an area of 0.50 m2. What is the pressure?
- (A) 50 Pa
- (B) 200 Pa
- (C) 500 Pa
- (D) 20000 Pa
Show Answer
Answer: B – P = F ÷ A = 100 ÷ 0.50 = 200 Pa.
Q3. What is the gauge pressure 2.0 m below the surface of water (density 1000 kg/m3)?
- (A) 200 Pa
- (B) 2000 Pa
- (C) 20000 Pa
- (D) 200000 Pa
Show Answer
Answer: C – P = ρgh = 1000 × 10 × 2.0 = 20000 Pa above atmospheric pressure.
Q4. What is the gauge pressure 10 m below the surface of water?
- (A) 1000 Pa
- (B) 10000 Pa
- (C) 100000 Pa
- (D) 1000000 Pa
Show Answer
Answer: C – P = 1000 × 10 × 10 = 100000 Pa.
Q5. What is the absolute pressure 2.0 m below the surface of water, if atmospheric pressure is 101000 Pa?
- (A) 20000 Pa
- (B) 81000 Pa
- (C) 101000 Pa
- (D) 121000 Pa
Show Answer
Answer: D – absolute pressure = atmospheric + gauge = 101000 + 20000 = 121000 Pa.
Q6. Pressure at a given depth in a liquid depends on
- (A) the shape of the container only
- (B) the total volume of liquid only
- (C) the depth, the liquid density and g
- (D) the surface area of the liquid only
Show Answer
Answer: C – P = ρgh: only depth, density and gravitational field matter, not the container’s shape or total volume.
Q7. What is the gauge pressure 3.0 m below the surface of oil with density 800 kg/m3?
- (A) 2400 Pa
- (B) 24000 Pa
- (C) 8000 Pa
- (D) 240000 Pa
Show Answer
Answer: B – P = 800 × 10 × 3.0 = 24000 Pa.
Q8. Two points are at the same depth in the same connected liquid. Their pressures are
- (A) equal
- (B) greater at the wider part of the container
- (C) greater at the narrower part of the container
- (D) zero in both cases
Show Answer
Answer: A – pressure in a connected static liquid depends only on depth, so points at the same depth have the same pressure regardless of container shape.
Q9. A dam holds back water. The water pressure on the dam is greatest
- (A) at the surface
- (B) at the bottom
- (C) at mid-depth
- (D) equally at all depths
Show Answer
Answer: B – pressure increases linearly with depth (P = ρgh), so it is greatest at the greatest depth, at the bottom.
Q10. A hydraulic system has a small piston of area 0.010 m2 and a large piston of area 0.10 m2. A force of 50 N on the small piston produces what force on the large piston?
- (A) 5 N
- (B) 50 N
- (C) 500 N
- (D) 5000 N
Show Answer
Answer: C – pressure is transmitted equally (Pascal’s principle), so F2 = F1 × (A2 ÷ A1) = 50 × (0.10 ÷ 0.010) = 50 × 10 = 500 N.
Buoyancy and Archimedes’ Principle
Q11. An object displaces 0.010 m3 of water. What is the buoyant force on it?
- (A) 0.10 N
- (B) 10 N
- (C) 100 N
- (D) 1000 N
Show Answer
Answer: C – Fb = ρVg = 1000 × 0.010 × 10 = 100 N, equal to the weight of the displaced water.
Q12. An object floats in water. The buoyant force on it is
- (A) zero
- (B) less than its weight
- (C) equal to its weight
- (D) greater than its weight
Show Answer
Answer: C – floating means equilibrium, so the upward buoyant force balances the downward weight exactly.
Q13. An object weighs 50 N in air and 30 N when fully submerged in water (apparent weight). What is the buoyant force?
- (A) 20 N
- (B) 30 N
- (C) 50 N
- (D) 80 N
Show Answer
Answer: A – apparent weight = true weight − buoyant force, so Fb = 50 − 30 = 20 N.
Q14. An object sinks in water. This means its average density is
- (A) less than water’s density
- (B) equal to water’s density
- (C) greater than water’s density
- (D) zero
Show Answer
Answer: C – if its density exceeds the fluid’s, its weight exceeds the maximum buoyant force (when fully submerged), so it sinks.
Q15. A block of density 600 kg/m3 floats in water (1000 kg/m3). What fraction of its volume is submerged?
- (A) 0.060
- (B) 0.60
- (C) 0.40
- (D) 1.0
Show Answer
Answer: B – floating balance gives ρobject ÷ ρfluid = submerged fraction = 600 ÷ 1000 = 0.60, i.e. 60% submerged.
Q16. Ice has density about 900 kg/m3 and floats in water. About what fraction of an iceberg is below the surface?
- (A) 10%
- (B) 50%
- (C) 90%
- (D) 100%
Show Answer
Answer: C – submerged fraction = 900 ÷ 1000 = 0.90, so about 90% is below the surface and only about 10% shows.
Q17. The same object floats in fresh water and in salt water (higher density). The buoyant force in salt water is
- (A) larger, because salt water is denser
- (B) smaller, because the object floats higher
- (C) the same, equal to the object’s weight in both cases
- (D) zero in salt water
Show Answer
Answer: C – a floating object is in equilibrium in either fluid, so the buoyant force equals its weight in both. In salt water it displaces less volume to produce that same force.
Q18. A fully submerged object displaces a volume of fluid equal to
- (A) its mass
- (B) its weight
- (C) its own volume
- (D) half its volume
Show Answer
Answer: C – a fully submerged object pushes aside fluid equal to its own volume; that is the displaced volume in Archimedes’ principle.
Q19. Two objects of equal volume, one iron and one wood, are both fully submerged in water. The buoyant forces on them are
- (A) greater on the iron object
- (B) greater on the wood object
- (C) equal, because buoyant force depends on displaced volume, not on the object’s material
- (D) zero on both
Show Answer
Answer: C – Fb = ρfluidVg depends on the fluid and the displaced volume only, so equal volumes give equal buoyant forces.
Q20. A boat floats on a lake. If extra cargo is loaded, the boat sinks deeper because
- (A) its density decreases
- (B) a larger buoyant force is needed to balance the larger total weight, requiring more displaced water
- (C) the water density increases
- (D) gravity increases
Show Answer
Answer: B – floating requires Fb = weight. More weight needs more buoyant force, which needs a larger submerged volume, so the boat sits lower.
Flow, Continuity and Bernoulli’s Principle
Q21. Water flows through a pipe of cross-sectional area 0.010 m2 at 2.0 m/s. What is the volume flow rate?
- (A) 0.0050 m3/s
- (B) 0.020 m3/s
- (C) 0.20 m3/s
- (D) 200 m3/s
Show Answer
Answer: B – Q = Av = 0.010 × 2.0 = 0.020 m3/s.
Q22. Water flows at 1.0 m/s through a pipe of area 0.040 m2, then enters a section of area 0.010 m2. What is the speed in the narrower section?
- (A) 0.25 m/s
- (B) 1.0 m/s
- (C) 4.0 m/s
- (D) 16 m/s
Show Answer
Answer: C – continuity: A1v1 = A2v2, so v2 = (0.040 × 1.0) ÷ 0.010 = 4.0 m/s.
Q23. If a pipe’s cross-sectional area is halved, the flow speed (for steady incompressible flow) becomes
- (A) halved
- (B) unchanged
- (C) doubled
- (D) quadrupled
Show Answer
Answer: C – Av is constant, so halving A doubles v.
Q24. Water flows through a horizontal pipe at 1.5 m/s through an area of 0.020 m2. What is the mass flow rate? (Density 1000 kg/m3.)
- (A) 0.030 kg/s
- (B) 3.0 kg/s
- (C) 30 kg/s
- (D) 300 kg/s
Show Answer
Answer: C – volume flow rate = 0.020 × 1.5 = 0.030 m3/s; mass flow rate = ρQ = 1000 × 0.030 = 30 kg/s.
Q25. In a horizontal pipe, where the flow is faster, the pressure is
- (A) higher
- (B) lower
- (C) unchanged
- (D) zero
Show Answer
Answer: B – by Bernoulli’s principle, at the same height a higher speed means a lower pressure, so that P + 0.5ρv2 stays constant.
Q26. Air flows faster over the top of an aeroplane wing than underneath it. The resulting pressure difference produces lift because
- (A) pressure is higher above the wing
- (B) pressure is lower above the wing, giving a net upward force
- (C) the wing’s weight decreases
- (D) air density increases above the wing
Show Answer
Answer: B – faster air above means lower pressure above (Bernoulli), so the higher pressure below pushes the wing upward.
Q27. In steady, incompressible flow through a pipe, the volume flow rate is
- (A) larger in wider sections
- (B) larger in narrower sections
- (C) the same at every cross-section
- (D) zero in narrower sections
Show Answer
Answer: C – what flows in must flow out (no fluid is created or stored), so Av is the same everywhere along the pipe.
Q28. A fluid speeds up as it moves from a wide section to a narrow section of a horizontal pipe. Its pressure in the narrow section is lower because
- (A) energy is lost to friction only
- (B) kinetic energy per unit volume increases, so pressure energy per unit volume must decrease to keep the Bernoulli sum constant
- (C) the fluid density decreases
- (D) gravity stops acting
Show Answer
Answer: B – Bernoulli’s equation conserves P + 0.5ρv2 + ρgh along a streamline at fixed height, so a rise in 0.5ρv2 is matched by a fall in P.
Q29. Pascal’s principle states that a pressure change applied to an enclosed fluid is
- (A) transmitted undiminished to every part of the fluid
- (B) lost immediately
- (C) doubled at each wall
- (D) transmitted only downward
Show Answer
Answer: A – an enclosed fluid transmits an applied pressure change equally in all directions, which is how hydraulic lifts amplify force.
Q30. A garden hose has its nozzle partly covered, reducing the exit area. The water exits faster because
- (A) pressure increases at the exit
- (B) the volume flow rate must stay roughly constant, so a smaller area needs a larger speed
- (C) water density increases
- (D) gravity increases the speed
Show Answer
Answer: B – continuity (Av = constant) means narrowing the exit raises the speed for the same flow rate, which is why a thumb over a hose makes the jet shoot farther.
Keep revising: work through the other AP Physics 1 units from the Physics MCQs hub, and keep the AP Physics Formula Sheet open while you practise.
All questions on this page are original practice questions written for QuaidianPoint. They are not College Board past-paper questions and this page is not affiliated with College Board.
