AP Physics 1: Energy and Momentum of Rotating Systems MCQs – 30 Practice Questions with Answers

Test yourself on AP Physics 1 Unit 6 Energy and Momentum of Rotating Systems with 30 original practice questions covering rotational kinetic energy, angular momentum, conservation of angular momentum, rolling without slipping and rotational work. Every answer includes the full working. Take g = 10 m/s2 unless stated otherwise.

Formula recap: rotational kinetic energy Krot = 0.5Iω2; angular momentum L = Iω; angular impulse = τΔt = ΔL; rolling without slipping: vcm = ωr; total kinetic energy of a rolling object = 0.5mvcm2 + 0.5Iω2. Revise all the formulas on our AP Physics Formula Sheet.

Rotational Kinetic Energy and Angular Momentum

Q1. A wheel has rotational inertia 2.0 kg m2 and rotates at 3.0 rad/s. What is its rotational kinetic energy?

  • (A) 3 J
  • (B) 6 J
  • (C) 9 J
  • (D) 18 J
Show Answer

Answer: C – Krot = 0.5Iω2 = 0.5 × 2.0 × 9.0 = 9 J.

Q2. An object has rotational inertia 3.0 kg m2 and angular velocity 4.0 rad/s. What is its angular momentum?

  • (A) 0.75 kg m2/s
  • (B) 7.0 kg m2/s
  • (C) 12 kg m2/s
  • (D) 48 kg m2/s
Show Answer

Answer: C – L = Iω = 3.0 × 4.0 = 12 kg m2/s.

Q3. Doubling an object’s angular velocity makes its rotational kinetic energy

  • (A) half as large
  • (B) twice as large
  • (C) four times as large
  • (D) unchanged
Show Answer

Answer: C – Krot is proportional to ω2, so doubling ω multiplies it by 4. Angular momentum, by contrast, only doubles.

Q4. A point mass of 2.0 kg moves at 3.0 m/s in a circle of radius 0.50 m. What is its angular momentum about the centre?

  • (A) 1.5 kg m2/s
  • (B) 3.0 kg m2/s
  • (C) 6.0 kg m2/s
  • (D) 12 kg m2/s
Show Answer

Answer: B – L = mvr = 2.0 × 3.0 × 0.50 = 3.0 kg m2/s.

Q5. A torque of 5.0 N m acts for 2.0 s on a rotating object. What is the change in its angular momentum?

  • (A) 2.5 kg m2/s
  • (B) 7.0 kg m2/s
  • (C) 10 kg m2/s
  • (D) 20 kg m2/s
Show Answer

Answer: C – ΔL = τΔt = 5.0 × 2.0 = 10 kg m2/s.

Q6. An object’s angular momentum changes by 24 kg m2/s in 4.0 s. What average net torque acted?

  • (A) 6.0 N m
  • (B) 20 N m
  • (C) 28 N m
  • (D) 96 N m
Show Answer

Answer: A – τ = ΔL ÷ Δt = 24 ÷ 4.0 = 6.0 N m.

Q7. A torque of 4.0 N m rotates an object through 3.0 rad. How much rotational work is done?

  • (A) 1.33 J
  • (B) 7 J
  • (C) 12 J
  • (D) 36 J
Show Answer

Answer: C – W = τθ = 4.0 × 3.0 = 12 J.

Q8. A motor delivers torque 5.0 N m to a shaft rotating at 4.0 rad/s. What is the rotational power?

  • (A) 1.25 W
  • (B) 9 W
  • (C) 20 W
  • (D) 100 W
Show Answer

Answer: C – P = τω = 5.0 × 4.0 = 20 W.

Q9. Two wheels have the same angular velocity. Wheel A has twice the rotational inertia of wheel B. Wheel A’s rotational kinetic energy is

  • (A) half of B’s
  • (B) equal to B’s
  • (C) twice B’s
  • (D) four times B’s
Show Answer

Answer: C – Krot = 0.5Iω2 is proportional to I at fixed ω, so doubling I doubles the energy.

Q10. A 1.0 kg point mass rotates at 2.0 rad/s at radius 1.0 m. What is its rotational kinetic energy?

  • (A) 1 J
  • (B) 2 J
  • (C) 4 J
  • (D) 8 J
Show Answer

Answer: B – I = mr2 = 1.0 kg m2, so K = 0.5 × 1.0 × 4.0 = 2 J. Equivalently, 0.5mv2 with v = ωr = 2.0 m/s gives the same 2 J.

Conservation of Angular Momentum

Q11. A spinning skater pulls her arms in, halving her rotational inertia. With no external torque, her angular velocity becomes

  • (A) half as large
  • (B) the same
  • (C) twice as large
  • (D) four times as large
Show Answer

Answer: C – L = Iω is conserved, so halving I doubles ω.

Q12. A skater’s rotational inertia changes from 4.0 to 2.0 kg m2 while spinning at 3.0 rad/s. What is her new angular velocity?

  • (A) 1.5 rad/s
  • (B) 3.0 rad/s
  • (C) 6.0 rad/s
  • (D) 12 rad/s
Show Answer

Answer: C – initial L = 4.0 × 3.0 = 12 kg m2/s; new ω = 12 ÷ 2.0 = 6.0 rad/s.

Q13. When the skater in Q12 pulls her arms in, her rotational kinetic energy

  • (A) stays the same
  • (B) decreases
  • (C) increases, because she does work pulling her arms inward
  • (D) becomes zero
Show Answer

Answer: C – initial K = 0.5 × 4.0 × 9.0 = 18 J; final K = 0.5 × 2.0 × 36 = 36 J. Angular momentum is conserved but kinetic energy is not; the extra energy comes from internal work.

Q14. Angular momentum of a system is conserved when

  • (A) kinetic energy is conserved
  • (B) there is no net external torque
  • (C) the system rotates at constant speed
  • (D) all masses are equal
Show Answer

Answer: B – just as net external force changes linear momentum, net external torque changes angular momentum. No net external torque means L is constant.

Q15. A disk (I = 2.0 kg m2) spins at 6.0 rad/s. A second disk (I = 3.0 kg m2) at rest drops onto it and they rotate together. What is their common angular velocity?

  • (A) 1.2 rad/s
  • (B) 2.4 rad/s
  • (C) 3.6 rad/s
  • (D) 6.0 rad/s
Show Answer

Answer: B – initial L = 2.0 × 6.0 = 12 kg m2/s; final I = 5.0 kg m2, so ω = 12 ÷ 5.0 = 2.4 rad/s.

Q16. A child on a rotating merry-go-round walks toward the centre. The angular velocity of the system

  • (A) decreases
  • (B) stays the same
  • (C) increases, because rotational inertia decreases
  • (D) becomes zero
Show Answer

Answer: C – moving mass inward reduces I, and with no external torque L = Iω is conserved, so ω increases.

Q17. A planet in an elliptical orbit moves faster when closer to the Sun. This is explained by conservation of

  • (A) linear momentum only
  • (B) angular momentum, since a smaller radius needs a larger speed to keep L = mvr constant
  • (C) kinetic energy only
  • (D) mass
Show Answer

Answer: B – gravity acts toward the Sun and exerts no torque about the Sun, so angular momentum is conserved; as r decreases, v must increase.

Q18. A spinning top slows down due to friction at its tip. Its angular momentum decreases because

  • (A) angular momentum is never conserved
  • (B) friction provides an external torque
  • (C) its mass decreases
  • (D) its rotational inertia increases
Show Answer

Answer: B – conservation requires no net external torque. Friction at the tip is an external torque that removes angular momentum.

Q19. Two disks of equal rotational inertia rotate in opposite directions at the same speed and stick together. Their final angular velocity is

  • (A) the original speed
  • (B) half the original speed
  • (C) zero
  • (D) twice the original speed
Show Answer

Answer: C – their angular momenta are equal and opposite, so total L is zero and the combined disks do not rotate.

Q20. A student holds a spinning bicycle wheel and flips it over. The student rotates in the opposite sense because

  • (A) energy is created
  • (B) total angular momentum of student plus wheel is conserved
  • (C) gravity reverses
  • (D) friction increases
Show Answer

Answer: B – flipping the wheel reverses its angular momentum, so the student must gain opposite angular momentum to keep the total unchanged.


Rolling Without Slipping

Q21. A wheel of radius 0.20 m rolls without slipping at centre-of-mass speed 4.0 m/s. What is its angular velocity?

  • (A) 0.80 rad/s
  • (B) 5.0 rad/s
  • (C) 20 rad/s
  • (D) 80 rad/s
Show Answer

Answer: C – for rolling without slipping, vcm = ωr, so ω = 4.0 ÷ 0.20 = 20 rad/s.

Q22. A hoop (I = mr2) of mass 2.0 kg rolls without slipping at 3.0 m/s. What is its total kinetic energy?

  • (A) 9 J
  • (B) 18 J
  • (C) 27 J
  • (D) 36 J
Show Answer

Answer: B – translational K = 0.5 × 2.0 × 9.0 = 9 J; rotational K = 0.5 × mr2 × (v ÷ r)2 = 0.5mv2 = 9 J; total = 18 J.

Q23. A solid disk (I = 0.5mr2) of mass 4.0 kg rolls without slipping at 2.0 m/s. What is its total kinetic energy?

  • (A) 8 J
  • (B) 12 J
  • (C) 16 J
  • (D) 24 J
Show Answer

Answer: B – translational K = 0.5 × 4.0 × 4.0 = 8 J; rotational K = 0.5 × 0.5mr2 × (v ÷ r)2 = 0.25mv2 = 4 J; total = 12 J.

Q24. A hoop rolls down a ramp from height 5.0 m, starting from rest. What is its speed at the bottom?

  • (A) 5.0 m/s
  • (B) 7.1 m/s
  • (C) 10 m/s
  • (D) 14 m/s
Show Answer

Answer: B – for a hoop, mgh = mv2 (translational plus rotational), so v = sqrt(gh) = sqrt(50) = 7.1 m/s.

Q25. A solid disk rolls down the same 5.0 m ramp from rest. What is its speed at the bottom?

  • (A) 7.1 m/s
  • (B) 8.2 m/s
  • (C) 10 m/s
  • (D) 12 m/s
Show Answer

Answer: B – for a disk, mgh = 0.75mv2, so v = sqrt(gh ÷ 0.75) = sqrt(50 ÷ 0.75) = sqrt(66.7) = 8.2 m/s. The disk beats the hoop because less energy goes into rotation.

Q26. A block slides (without rolling) down the same 5.0 m ramp from rest. Compared with the rolling disk, the block reaches the bottom

  • (A) slower, because it has more mass
  • (B) faster, because none of its energy goes into rotation
  • (C) at the same speed as the disk
  • (D) slower, because of air resistance
Show Answer

Answer: B – the sliding block converts all mgh into translational kinetic energy: v = sqrt(2gh) = 10 m/s, faster than the disk’s 8.2 m/s.

Q27. For an object rolling without slipping, the contact point with the ground is momentarily

  • (A) moving at twice the centre-of-mass speed
  • (B) moving at the centre-of-mass speed
  • (C) at rest
  • (D) moving backward at the centre-of-mass speed
Show Answer

Answer: C – rolling without slipping means the contact point has zero instantaneous velocity relative to the ground; that is what “without slipping” means.

Q28. A solid sphere and a hoop of equal mass and radius are released from rest at the top of the same ramp. Which reaches the bottom first?

  • (A) the hoop, because it has more rotational inertia
  • (B) the sphere, because a smaller fraction of its energy goes into rotation
  • (C) they tie
  • (D) it depends on their masses
Show Answer

Answer: B – the sphere has I = 0.4mr2 versus the hoop’s mr2, so less energy is tied up in rotation and more is available for translation, giving a higher speed.

Q29. A wheel rolling without slipping has centre-of-mass speed v. What is the speed of the topmost point of the wheel relative to the ground?

  • (A) 0
  • (B) v
  • (C) 2v
  • (D) v ÷ 2
Show Answer

Answer: C – the top point’s rotational velocity (v forward) adds to the translational velocity (v forward), giving 2v, while the bottom point’s rotational velocity cancels the translation.

Q30. A flywheel’s rotational kinetic energy is 36 J at 6.0 rad/s. If it slows to 3.0 rad/s with no other energy input, its rotational kinetic energy becomes

  • (A) 36 J
  • (B) 18 J
  • (C) 9 J
  • (D) 72 J
Show Answer

Answer: C – K is proportional to ω2. Halving ω quarters K: 36 ÷ 4 = 9 J. (Check: I = 2K ÷ ω2 = 72 ÷ 36 = 2.0 kg m2; new K = 0.5 × 2.0 × 9.0 = 9 J.)

Keep revising: work through the other AP Physics 1 units from the Physics MCQs hub, and keep the AP Physics Formula Sheet open while you practise.

All questions on this page are original practice questions written for QuaidianPoint. They are not College Board past-paper questions and this page is not affiliated with College Board.